Description
The DKFD 50 Digital ultrasonic flaw detector combines conventional flaw detection capabilities with the efficiency of an intuitive and portable instrument. The DKFD 50 flaw detector provides high-quality flaw detection along with exceptional ease of use.· Simple to use and fast in operation, from the most basic inspection requirements to the most complex.· From high frequencies for inspections on thin materials to low frequencies for inspections on attenuating materials or for detecting deeper flaws.· Applications in the automotive sector, power generation, oil & gas, and aerospace sectors.Measurements for the automotive industryIt is possible to measure the distance between the peaks of an echo sequence with a resolution of 0.01 mm.Wall corrosion thickness in the power generation and petrochemical sectorsDuring the measurement of wall thickness on corroded parts using dual-element probes, it is possible to view the reading simultaneously with the A-SCAN, thus achieving the highest measurement reliability. On hot surfaces, the automatic freezing function is used, minimizing the contact time with the probe. The minimum acquisition mode provides the most precise measurement read at the end of a continuous scan. Inspection of forgings in the energy and aerospace production sector. The automatic setting of the pulse repetition frequency from 20 Hz to 1 kHz eliminates ghost echoes during the inspection of fine grains and large workpieces. These defects from an equivalent reflector will be detected starting from a size of 0.3 mm. Inspection of special materials in the aerospace and automotive industry. Use probes up to 250 kHz to penetrate highly attenuating materials or composite materials.Our DFKD 50 composite probes will drastically improve the signal-to-noise ratio on sound-diffusing materials (glass or carbon-reinforced plastic, composites, or alloys)
